器材箱Gear Box

用這組去模擬Simulate

左右每一類一個容器,按〔+〕挑器材;選好望遠鏡和相機就會自動接好轉接環、墊片(標 ,下面點了可換接法)。中間的立體圖照比例,可以拖著轉;點零件會放大到那一段。〔自動裝配〕再幫你補赤道儀、腳架。組好的就是望遠鏡模擬用的器材(登入存在帳號,沒登入存在這台瀏覽器)。尺寸原廠沒公布的零件畫成「示意」。One box per kind on each side: press + to pick. Once a telescope and a camera are in, adapters and spacers are added for you (marked ; tap one below to swap). The 3D view is to scale; drag to turn, tap a part to zoom to it. Auto-fit also suggests a mount and tripod. This rig is the one the simulator uses. Parts without published sizes are drawn as “schematic”.

放大到「望遠鏡 → 接環 → 相機」這一段;下面是每一節的接口與後焦。Zoomed to telescope → adapters → camera; below are each joint and the back focus.

導星誤差(RMS)、用訊噪比挑導星星、不導星最長能拍多久。導星鏡或 OAG、導星相機在左右的容器裡加。Guide RMS, guide stars by S/N, and the longest unguided sub. Add a guide scope or OAG and a guide camera in the boxes.

臨界焦域、溫度漂移與自動對焦間隔;後焦在〔光路〕看。Critical focus zone, temperature drift and the autofocus interval; back focus is under Train.

整台重量與赤道儀負重、各件耗電與電源能撐多久(OWL 照目錄數字算;沒公布的不算進去並寫出來)。Total weight against the mount’s rating, each part’s current and how long the power lasts (from catalogue figures; unknown ones are named).

光路Train

    先放一支望遠鏡或鏡頭Add a telescope or lens first

    正在載入…Loading…

    到望遠鏡模擬看導星框See the guide frame in the Telescope Simulator